manualshive.com logo in svg

Measurement Systems Charter, Руководство пользователя, Страница: 7 / 35

Поделиться
Скачать
Measurement Systems Charter Скачать руководство пользователя страница 7

MSI-9300 Crane Scale™ 

  

•

   User Guide    Page 7   

MEASUREMENT  SYSTEMS  INTERNATIONAL

Rev 1  7/27/02 for SW Ver 1-1

MSI-9300 PORTA-WEIGH PLUS DISPLAY

The MSI-9300 has six 1.2” (30.5mm) ultrabright LED Digits along with annunciators. The brightness of the 

display is automatically adjusted to the lighting conditions. When the ambient light is dim, the LEDs are lower 

in intensity. When ambient light is bright, the LED intensity level is increased to allow sunlight readability.

Ttl

0

MOTION

RF

2

BAT

LOW

Net Grs

kg lb

Tare

8.8.8.8.8.8

1

2

3

6 Digit Weight and Data Display

Center of Zero

Indicator

Set Points

1-3 

RF Comm

Indicator

Weight in

Motion

Displaying

Tare Wt

Displaying

Total Wt

Displaying

Net Wt

Displaying

Gross Wt

Wt Unit is

kilograms

Wt Unit is

pounds

Light

Sensor

Low Battery

Warning

Minus Sign

Only used when

six digits are displayed

Middle segment used

for ≤5 displayed digits

KEYBOARD OPERATIONS

T

0

ZERO NET/GROSS TARE

POWER

TEST

1

2

3

4

5

1)  POWER – Push to turn the scale on or off.
2)  ZERO – Used to zero the scale. The zero range is usually 100% of full scale unless prohibited by legal-for 

trade settings.

3)  NET/GROSS – Switches scale between NET and GROSS weight readings (assuming a Tare value has 

been stored).

4)  TARE – When in GROSS mode, pushing TARE will zero any weight on the scale and cause the scale to go 

into the NET mode. When in NET mode, pushing TARE will display the TARE value for 2 seconds, then 

revert back to the NET weight display. In NET mode, pushing TARE twice will set a new Tare. Pushing 

TARE followed immediately by ZERO will clear the Tare value and revert the scale to Gross Mode

5)  TEST/USER Key – When pushed, this causes a display segment check, and provides battery and RF 

Network information. Also programmable for USER desired functions. See SETUP USER KEY. User Key 

Functions Available: Units (kg/lb) • Total • Scan List Increment (multi-channel systems) • °F/°C • Change 

Network (SW V3-33 and above) • Test (default)

Содержание Charter




































Отзывы:

Нет отзывов