background image

 

Trademark and Copyright Information 

TracerDAQ, Universal Library, Harsh Environment Warranty, Measurement Computing Corporation, and the Measurement 
Computing logo are either trademarks or registered trademarks of Measurement Computing Corporation.  

Windows, Microsoft, and Visual Studio are either trademarks or registered trademarks of Microsoft Corporation 

LabVIEW is a trademark of National Instruments. 

CompactFlash is a registered trademark of SanDisk Corporation. 

All other trademarks are the property of their respective owners. 

Information furnished by Measurement Computing Corporation is believed to be accurate and reliable. However, no 
responsibility is assumed by Measurement Computing Corporation neither for its use; nor for any infringements of patents or 
other rights of third parties, which may result from its use. No license is granted by implication or otherwise under any patent or 
copyrights of Measurement Computing Corporation. 

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form by 
any means, electronic, mechanical, by photocopying, recording, or otherwise without the prior written permission of 
Measurement Computing Corporation. 

Notice 

Measurement Computing Corporation does not authorize any Measurement Computing Corporation product for use 
in life support systems and/or devices without prior written consent from Measurement Computing Corporation. 
Life support devices/systems are devices or systems which, a) are intended for surgical implantation into the body, 
or b) support or sustain life and whose failure to perform can be reasonably expected to result in injury. 
Measurement Computing Corporation products are not designed with the components required, and are not subject 
to the testing required to ensure a level of reliability suitable for the treatment and diagnosis of people. 

  

 

iii 

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание PCI-DDA08/12

























Отзывы: