22
Using the Signal Generator:
Tracing the Direct Connected Signal
The tracing technique used to follow the Signal
Generator signal when applied by a direct connection
method (Direct Connection Leads, Signal Clamp
or Signal Injector ) is almost exactly the same as
the normal tracing technique used on Power or Radio
Modes except that the signal that the Locator
is detecting will get weaker the further away from
the Signal Generator that you go. It will be necessary
to regularly adjust (increase ) the Locator Sensitivity
Control to compensate for this.
NOTE It is not possible to search for the signal above any leads connecting the Signal Generator to the service
or above the Earth Lead connected to the Earth Stake.
