12
24V
5A
3.2A
3.7A
OUTPUT
(MD-100)
DC VOLTAGE
OUTPUT VOLTAGE CODE
MD-100R
MD-100S
MD-100T
MD-100U
MD-100V
MD-100X
5V
5V
5V
15V
5V
12V
15V
24V
15V
10A
10A
10A
4A
8A
4.2A
3.4A
2.5A
2.7A
2 ~ 10A
2 ~ 10A
2 ~ 10A 0 ~ 4.7A
1 ~ 4.7A
0 ~ 8A
0 ~ 5.8A
0.5 ~ 3A
0 ~ 4.7A
90W
100.4W
101W
100W
100.5W
100mVp-p
150mVp-p
150mVp-p 200mVp-p
150mVp-p
100mVp-p
100mVp-p
100mVp-p
150mVp-p
4.75 ~ 5.5V 4.75 ~ 5.5V 4.75 ~ 5.5V
4.75 ~ 5.5V
14.2 ~ 16.5V 14.2 ~ 16.5V
11.4 ~ 13.2V
14.2 ~ 16.5V 22.8 ~ 26.4V 4.75 ~ 5.5V
±
3.0%
±
3.0%
±
3.0%
±
3.0%
±
3.0%
±
3.0%
±
3.0%
±
3.0%
±
3.0%
±
2.0%
±
1.0%
±
1.0%
±
1.0%
±
1.0%
±
1.0%
±
1.0%
±
1.0%
±
1.0%
±
1.0%
±
0.5%
±
2.0%
±
2.0%
±
2.0%
±
2.0%
±
2.0%
±
2.0%
±
2.0%
±
2.0%
±
2.0%
±
1.0%
1500ms, 50ms, 20ms at full load
■
1 SLOT Isolated Dual output (100W) MD-100
RATED CURRENT
CURRENT RANGE
RATED POWER
Note.6
RIPPLE & NOISE (max.)
Note.2
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE, HOLD UP TIME
105 ~ 150% rated output power
5V
8A
0 ~ 10A
100mVp-p
12V
3.4A
0 ~ 4.7A
100.8W
120mVp-p
11.4 ~ 13.2V
±
3.0%
±
2.0%
±
1.0%
±
0.5%
±
2.0%
±
1.0%
24V
2.5A
0.6 ~ 3A
240mVp-p
22.8 ~ 26.4V
12V
12V
5A
3.4A
1 ~ 5A 0 ~ 5.8A
100.8W
120mVp-p 120mVp-p
11.4~ 13.2V 11.4~ 13.2V
±
3.0%
±
2.0%
±
1.0%
±
0.5%
±
2.0%
±
1.0%
MD-100W
OVERLOAD
OVER VOLTAGE
PROTECTION
Protection type : Shut down o/p voltage, re-power on to recover
Protection type : Shut down o/p voltage, re-power on to recover
5.6 ~ 7.2V 5.6 ~ 7.2V 5.6 ~ 7.2V
5.6 ~ 7.2V
13.3 ~ 17V
16.6 ~ 22V
16.6 ~ 22V
16.6 ~ 22V
26.5 ~ 34V 5.6 ~ 7.2V
13.3 ~ 17V
26.5 ~ 34V
13.3 ~ 17V 13.3 ~ 17V
REMOTE INHIBIT CONTROL
RC+/RC-: 0 ~ 0.8V or OPEN, POWER ON RC+/RC-: 4 ~ 12V POWER OFF
FUNCTION
±
0.5%
±
0.5%
±
0.3%
±
0.3%
±
0.2%
±
0.2%
±
1.0%
±
1.0%
±
0.5%
±
0.5%
±
0.5%
±
0.5%
1500ms, 50ms, 20ms at full load
LINE REGULATION
LOAD REGULATION
SETUP, RISE, HOLD UP TIME
OVERLOAD
OVER VOLTAGE
PROTECTION
116 ~ 150% rated output power
Protection type : Shut down o/p voltage, re-power on to recover
4.1 ~ 5V
6.1 ~ 7.5V
13.3 ~ 18V
16.9 ~ 22V
26.5 ~ 35V
53.1 ~ 60V
Protection type : Constant current limiting, recovers automatically after fault condition is removed
REMOTE INHIBIT CONTROL
RC+/RC-: 0 ~ 0.8V or OPEN, POWER ON RC+/RC-: 4 ~ 12V POWER OFF
FUNCTION
OUTPUT
(MS-75)
DC VOLTAGE
OUTPUT VOLTAGE CODE
3.3V
5V
12V
15V
48V
15A
15A
6.3A
1.6A
0 ~ 15A
0 ~ 15A
0 ~ 6.3A
0 ~ 5A
0 ~ 3.2A
0 ~ 1.6A
17.3A
17.3A
7.3A
5.8A
1.8A
49.5W
75W
75.6W
75W
76.8W
76.8W
80mVp-p
80mVp-p
150mVp-p
150mVp-p
150mVp-p
250mVp-p
2.6 ~ 4V
4 ~ 6V
9 ~ 13.2V
13.2 ~ 16.8V
20 ~ 26.4V
40 ~ 53V
±
2.0%
±
2.0%
±
1.0%
±
1.0%
±
1.0%
±
1.0%
MS-75L
MS-75M
MS-75N
MS-75O
MS-75P
MS-75Q
■
1 SLOT Single output (75W) MS-75
RATED CURRENT
CURRENT RANGE
PEAK LOAD
Note.4
RATED POWER
RIPPLE & NOISE (max.)
Note.2
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
NOTE
1. MP450:The value changed by installing different output modules. The efficiency in specification means output modules are composed by following modules.
5V(Voltage code C)*1, 12V(Voltage code E)*1, 24V(Voltage code H)*1, 5V(Voltage code M)*1.
MP650:The value changed by installing different output modules. The efficiency in specification means output modules are composed by following modules.
5V(Voltage code C)*2, 12V(Voltage code E)*1, 24V(Voltage code H)*2.
MP1K0:The value changed by installing different output modules. The efficiency in specification means output modules are composed by following modules.
5V(Voltage code C)*2, 12V(Voltage code E)*2, 24V(Voltage code H)*3.
The hold-up time of above combination is 20ms(typ.)
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. 35% Duty cycle maximum within every 10 seconds. Average output power should not exceed the rated power.
5.
The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on
a
mm*
mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.
720
360
For guidance on how to
perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)
6. If the output voltage adjust to higher level, the rated current should be derated to meet the total rated power for both outputs(For MD-100 only).
7.The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).
℃
℃
Содержание MP1K0
Страница 1: ...MP450 650 1K0 Instruction Manual...
