Installation Manual
（
9
）
For other information about the products, please refer to www.meanwell.com for details.
Warning / Caution !!
（
1
）
Risk of electrical shock and energy hazard. All failure should be examined by a qualified technician. Please do
not remove the case of the power supply by yourself!
（
2
）
Please do not install power supplies in places with high moisture or near the water.
（
3
）
Please do not install power supplies in places with high ambient temperature or near fire source. The
maximum ambient temperature please refer to their specifications.
（
4
）
Output current and output wattage must not exceed the rated values on specifications.
（
5
）
The ground(FG) must be connected to earth ground.
（
6
）
All MW’s PSUs are designed in accordance with EMC regulations and the related test reports are available by
request. Since they are belong to component power supplies and will be installed inside system enclosure,
when they are integrated into a system, the EMC characteristics of the end system must be re-verified again.
（
7
）
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(a) This device may not cause harmful interference, and
(b) this device must accept any interference received, including interference that may cause undesired
operation.operation.
（
8
）
For series of LRS, NES, PSP, PSPA, RD, RSP, RS, SE that certified with BSMI approvals, flammability of V1 or
above is required for surrounding equipment and operation of this equipment in a residential environment
could cause radio interference.
PSU
PSU
