27
Reconnecting the Batteries (Lithium Modules)
1.
Open battery compartment and lift up battery cover to expose Lithium Modules.
2.
Grasp
RED
BATTERY QUICK DISCONNECT LEVER (Fig.F)
3.
Push lever INWARD into battery compartment wall plug until “CLICK” is heard with complete connection.
4.
Replace battery compartment lid and secure with (4) black ½ turn Quick Turn Tabs provided.
5.
Mower is ready for use.
Battery Storage
***See page 30 Lithium Energy Module Maintenance and Care***
WARNING
Seat Belt
To avoid personal injury:
Always use the seat belt when any ROPS is installed.
Do not use the seat belt if a foldable ROPS or a retractable ROPS is down or there is no
ROPS.
Adjust the seat belt for proper fit and connect the buckle.
This seat belt is auto-locking retractable type.
WARNING
ROPS (Roll Over Protection System)
To Fold the ROPS:
1. Remove both R-Clips and then pull outward on Hitch Pins.
2. Fold the ROPS slowly rearward.
3. Reinstall Hitch Pins and R-Clips into
holes in ROPS frame to lock.
To avoid personal injury:
Make sure that both Hitch Pins are properly installed and secured with R-Clips.
To Raise the ROPS to Upright Position
1. Remove both R-Clips and Hitch Pins.
2.
Raise ROPS to the upright position.
3.
Align Hitch Pin holes, insert both pins and secure with R-Clips.
To avoid personal injury: Make sure that both Hitch Pins are properly installed and secured with
R-Clips.
R-Clip
Hitch Pin
