12
Water Test
Performing the water test is vital to familiarize yourself with your MultiPot 2.0 and verify
that it is functioning properly. Complete the following steps to perform the water test:
1. Place stainless steel inner pot into MultiPot base. Plug MultiPot in.
2. Pour 3 cups (720 milliliters) cold water into stainless steel inner pot.
3. Lock lid in place and select Pressure Cook.
ADD 3 CUPS OF WATER
LOCK LID
SELECT PRESSURE COOK
4. Select Quick as release style, and High for pressure level. Set timer for 2 minutes.
5. The red float should eventually rise and the progress indicator will go from Preheat to
Cook. No steam should escape from the vent during the cook phase. After the cycle is
complete the pot will automatically quick-release all steam from the pot. When the red
float falls to its original position all steam is released from the pot.
CAUTION
Never place face, hands, or unprotected skin over the steam release valve when
MultiPot is running or releasing pressure.
ADJUST TIME
(PRESS – BUTTON TO ADJUST
TIME TO 2 MINUTES)
SELECT QUICK
SELECT HIGH
Pressure
Cook
