7
Step 1: Connect this product to the network
2.
Connect the power supply to this product, and then insert
the AC Plug into the electric outlet.
· Only ever use the AC adapter bundled with this product.
3.
Verify the Link LED (Green) turns on and the Wireless LED
(Green) turns off.
· If this product has been used in another network, reset it to factory
default prior to setup (See page 14).
The following items are necessary for the setup.
- Ethernet Hub
- network cable
- USB cable
1.
Connect a network cable to this product.
Connect the other end of the network cable to one of the
following devices which has already been connected to
your network.
- Access Point
- Broadband router
- Ethernet Hub
· Use a crossover cable when connecting this product directly to a PC.
Please connect networkcable between your PC and your telescope
server now! otherwise installation fails in Step 2 no. 6.
B
C
B
C
