OPERATION
•
To select the indoor/ outdoor temperature and humidity mode,
press
UP (? )
or
DOWN (? )
until the
IN
icon flashing
with a beep sound alert.
VIEWING REMOTE (CHANNEL) TEMPERATURE AND
HUMIDITY
Static Display:
•
Press the
CHANNEL
button to select measurements from
different remote sensors, each is set to a unique channel 1,
2 or 3.
Channel Auto-Scan Display:
•
To enable an automatic scan of all channels, press and hold
CHANNEL
, until the icon is displayed. The measurements
from each remote channel will be alternately displayed with a
5 seconds viewing.
NOTE:
the channel auto-scan feature can be active only if there
are more than one
remote sensors operating and are set to
different channels.
PROGRAMMING TEMPERATURE IN CELSIUS OR
FAHRENHEIT
•
Press and hold
MODE
button for 3 seconds to toggle the
temperature unit in Celsius (ºC) or Fahrenheit (ºF).
SETTING TEMPERATURE ALARM
•
Press down button to select temperature display.
•
Press
ALARM
button selecting the desired alarm, the upper
temperature alert with icon (if disabled, displays
OFF
), or
lower temperature alert with icon (if disabled, displays
OFF
).
•
Press and hold
ALARM
button until the temperature digits
flashing.
•
Adjust the temperature digits using the
UP (? )
or
DOWN
(? )
. Press and hold either button for fast digits advance
•
Press the
ALARM
to confirm selection and return to the
temperature alarm selection screen
ACTIVATING OR DEACTIVATING TEMPERATURE
ALARMS
•
Once the above alerts are displayed, press the
UP (? )
or
DOWN (? )
to enable or disable the corresponding alert.
4
1
