VIEWING PRESSURE AND ALTITUDE INFORMATION
To view pressure or altitude information, press
MODE
button.
The display will alternate between the sea level pressure, local
pressure and local altitude screens.
PROGRAMMING SEA LEVEL PRESSURE (not required if
you did altitude)
•
Press and hold
MODE
, until the barometric pressure digits are
flashing.
•
Enter the desired sea level pressure value by pressing
UP (? )
or
DOWN (? )
buttons. (Press and hold either button for
accelerated digit advance.)
•
Press
MODE
, to confirm sea level value selection.
CHANGING PRESSURE AND ALTITUDE UNITS
•
Press
MODE
as needed, until
“LOCAL”
pressure is displayed.
•
Press and hold
MEM/ HISTORY
, until the pressure unit is
flashing.
•
Change local or sea level pressure units by pressing the
UP (? )
or
DOWN (? )
buttons to select the pressure units.
Choose from:
inHg, hPa/mBar or mmHg
.
•
Press
MEM/ HISTORY
to confirm your selection.
•
Press
MODE
button until the local altitude value will be
displayed
•
Press and hold
MEM/ HISTORY
until the altitude unit is
flashing.
•
Select the ALTITUDE unit:, meters or feet, by pressing
UP (? )
or
DOWN (? )
buttons.
•
Press
MEM/ HISTORY
to confirm your selection.
VIEWING SEA LEVEL PRESSURE HISTORY
•
In pressure mode, press
MEM/ HISTORY
button entering the
sea level pressure display.
•
When the
SEA LEVEL
is displayed, press
MEM/ HISTORY
repeatedly viewing the sea level pressure history for the past 24
hours in 1 hour intervals.
•
If no buttons are pressed for 5 seconds, the unit will
automatically return to the default Pressure and Weather
Forecast Mode.
VIEWING PRESSURE, TEMPERATURE AND HUMIDITY
CHARTS
The bar chart in
Pressure Window
can be configured to display
a historical data for the sea level pressure and temperature or
humidity for channel 1.
2
1
