9
is being used.
•
Install 2 “AA” size alkaline batteries (not included) matching the
polarities shown in the battery compartment.
•
Replace the battery compartment door and secure the screws.
•
Secure the remote sensor in the desired location.
MAIN UNIT
•
Remove the battery compartment door.
•
Install 2 batteries (UM-3 or “AA” size 1.5V) matching the polarity as
shown in the battery compartment.
•
Replace the battery compartment door.
LOW BATTERY WARNING
A low-battery indicator [
] will appear next to the indoor or remote data
reading line of the main unit warning that the corresponding batteries need
replacement.
GETTING STARTED
WEATHER DISPLAY
After batteries are installed; remote sensor will transmit temperature data at 45
second intervals. The main unit may take up to two minutes to receive the initial
readings. Upon successful reception, remote temperature will appear next to
the OUT abbreviation on the main unit’s display (The main unit will
automatically update readings at 45-second intervals)
After communication between the main unit and remote sensor has been
established, secure the remote sensor in the desired location.
If no signal is received from the remote sensor within two minutes, dashes [- - -]
will be displayed. Press and hold the DOWN (
) button on the main unit for