Me ME580, Руководство пользователя

Страница: 19 / 30

13
UNDERSTANDING YOUR ME580
ME Amplifiers Melbourne, Australia
DUAL AMPLIFICATION – HIGHER QUALITY SOUND
Dual Amplification is sometimes also referred to as Bi-Amplification, which would usually involve an electronic
crossover before the power amplifiers. Dual Amplification does not use an external electronic crossover, but
requires your Speakers to have a Bi-Wire set of terminals. These are two (or more) pairs of terminals, one set
for High frequencies and one set for Low frequencies, which are usually connected together with a wire or
metal strap. You should consult your Speaker manual very carefully, or speak to your ME dealer if there is any
doubt about the suitability of your speakers to be run as Dual Amplified. Severe damage to your amplifiers can
be the result if the wiring is not correct. A typical Dual Amplification connection is illustrated below.
NOTE: Metal strap or wire
connecting High and Low
frequency speaker terminals MUST
be disconnected on both speakers.
Ensure correct polarity (positive
terminal on amplifier to positive
terminal on speaker) for all
speaker connections.
HIGH Amplifier
LOW Amplifier
Preamplifier
LEFT
Speaker
RIGHT
Speaker
L
R
L
R
L Out
R Out