Page 21
Operation
ACC5703
5.
Operation
The measurement device is already calibrated when delivered. Calibration by the user is not necessary. After
connection to the operating voltage, the sensor is immediately ready for operation and independently initiates
the measurement.
Additionally, the digital RS485 interface is ready to react to enquiries by the master (periodic retrieval of mea-
sured data).
For sensor configuration please use the power supply and output cable with USB/RS485 converter
as well as the software of MICRO-EPSILON.
i
Allow the sensor to warm up for approximately 10 minutes after connection of the voltage supply.
6.
Liability for Material Defects
All components of the device have been checked and tested for functionality at the factory. However, if de-
fects occur despite our careful quality control, MICRO-EPSILON or your dealer must be notified immediately.
The liability for material defects is 12 months from delivery.
Within this period, defective parts, except for wearing parts, will be repaired or replaced free of charge, if the
device is returned to MICRO-EPSILON with shipping costs prepaid. Any damage that is caused by improper
handling, the use of force or by repairs or modifications by third parties is not covered by the liability for mate-
rial defects. Repairs are carried out exclusively by MICRO-EPSILON.
Further claims can not be made. Claims arising from the purchase contract remain unaffected. In particular,
MICRO-EPSILON shall not be liable for any consequential, special, indirect or incidental damage. In the inter-
est of further development, MICRO-EPSILON reserves the right to make design changes without notification.
For translations into other languages, the German version shall prevail.
