Chapter 2: Models and technical specifications
me-bike Classic
Dimension: 1600 x 630 x 1230
Motor: Brushless
Power: 200W with Pedal
Lead Acid Battery: 48V12AH
Charger: 48V1.8A
Max load: 150kg
Max Speed: 25km/h
Range: 40-50km
Charging Time: 3-6h
Tire: 16 X 2.5
Brake system: F & R drum
Extras: Alarm system with two remote
controllers
me-bike Commuter
Dimension: 1750 x 650 x 1250
Motor: Brushless
Power: 200W with Pedal
Lead Acid Battery: 48V20AH
Charger: 48V2.8A
Max load: 150kg
Max Speed: 25km/h
Range: 70-100km
Charging Time: 3-6h
Tire: 16 X 2.5
Brake system: F & R drum
Extras: Alarm system with two remote
controllers
Chapter 3: Battery charger and battery management
3.1 Charger
Our charger is purpose built for our bicycles. The label on the back side of the charger
indicates the input voltage that matches your me-bike.
Use only the supplied lead-acid charger. Use of different chargers may cause serious
injury to you and may damage the battery pack. The indicator lights on the end of the
charger provide important information about charger and battery.
RED:
The battery is charging
GREEN: The battery is completely full and in maintenance mode
(Your charger may have 2 indicator lights. The second will show a RED light to indicate
power from your local power socket)
If the red light on the charge indicator does not change colour after a long period of
charging (over 12 hours), it is likely there are some problems with the battery or charger.
Please stop charging to avoid overcharging battery and contact me-bike directly.
★
The charger’s plug contain electricity so please take care that children do not try to
touch the points or insert objects into the charger as it carries high voltages inside.
★
Do not submerse the charger in liquid and keep away from moist environments and
avoiding spilling liquids onto the charger.
★
Important note: Please do not use another brand of charger or battery on electric
bicycle except when they are tested by our authorized professionals.
3.2 Charging the battery
On the bike
Please turn off the key switch (also called ignition switch) before charging the batteries.
First connect the output plug of the charger into the charging socket of the electric
bicycle, second connect the input plug of charger with your local power socket. Make sure
the charger is well ventilated it is normal for the charger to get warm, do not obstruct air
ventilation of the charger.
Charging battery alone
When you charge the battery away from the electric bicycle, first insert the output plug of
charger to battery charging socket, and then insert the input plug of charger to your local
power socket. Please ensure that you place the charger and battery on a flat surface. Do
not place the battery upside down and do not place anything on the charger or battery
when charging. Keep the charger in a well-ventilated area when charging.
3.3 Batteries have life spans:
The battery capacity will be reduced over time and the overall performance of the battery
will reduce accordingly.
