OPERATING INSTRUCTIONS
MODE
Absorption
Equalisation
End of
Equalisation
Floating
Internal
Temperature
fault
Output
voltage fault
Battery
fuse fault
“Night” Mode
12V-25A
12V-40A
24V-20A
LED
Steady
yellow
(1)
Yellow
blinking
(2)
Green
blinking
(3)
Green (4)
Red
fixed
(5)
Red
blinking
(6)
Red
Flashing
(7)
-
STATUS
The batteries are charging. Time
required to complete Absorption
mode varies depending on the
initial status of the batteries, but is
limited to 6 hours.
The batteries are coming to the end of
the charging cycle. Time required to
complete Equalization mode, depen-
ding on the initial status of the batteries,
varies from 30 minutes to 4 hours.
The batteries are almost charged.
Floating mode will begin in less
than 30 minutes.
The batteries are completely charged.
The charger is on Standby for a
period of between 30 seconds
and 10 minutes. Once the fault has
been solved, the device will start
up again automatically.
4
If this problem arises, please
check the external temperature
as well as the internal fan and the
space around the charger.
The charger is on Standby for a pe-
riod of 30 seconds. Once the fault
has been solved, the device will
start up again automatically.
4
In reality, the PC Board has pro-
bably failed and the damage is
irreversible.
The fuse should be replaced.
4
Please check all connections as
well as the battery’s polarity and
status
This mode allows the charger to
work without noise (from the fan).
In this case, charging levels adapt.
To activate this mode, press the
button for about 2 seconds. To
deactivate, a simple press of the
button or the mode deactivates
automatically after 10 hours.
FIRST-rev 01
(1)
(2)
(3)
(4)
(5)
(6)
(7)
