NIPE Monitor V1 - Continuous monitoring system of comfort
.
/
.
discomfort for newborn infants
MD/PRD/IN16.NIPEV1 v.10 - 12 MAR 2020
28
A message will appear to confirm the success of the updating (figure 30). Press on [
Ga terug
naar NIPE Monitor V1]
to back to the main menu. This step could take few seconds due to the
updating process.
If no USB key is plugged or not detected yet, a message will appear to inform the user (figure
31):
If the “NIPE.exe” is not present on the USB key, a message appears (figure 32):
Figure 32
8.7
Shut down
The selection of the button [
Afsluiten]
ends the session and will shut down the monitor.
NOTE:
It is possible to shut down the monitor directly with the switch located on the left side
of the monitor (the same that for booting) only if the context doesn’t enable you to reach the
main menu. This is however not recommended because it could affect the monitor’s proper
functioning.
NE DO NOT UNPLUG THE POWER CABLE WHILE THE MONITOR IS BEING
USED. IT COULD AFFECT THE MONITOR’S PROPER WORKING ORDER.
Figure 31
Figure 30
