![MDMS ANI Monitor V2 Скачать руководство пользователя страница 36](http://html1.mh-extra.com/html/mdms/ani-monitor-v2/ani-monitor-v2_user-manual_1757359036.webp)
ANI Monitor V2 - Continuous analgesia monitoring system
MD/PRD/IN16.ANIV2 v.07 - 12 MAR 2020
P a g e
36 | 45
NOTE:
it is also possible to switch off the monitor directly by pushing the switch on the front
(the same one as to turn it on) but only if the context does not allow you to reach the main
menu. This is not recommended and could cause the monitor to dysfunction.
8
Trouble shooting
Problem
Solution
The monitor is not displaying an ECG
signal.
Check
the
patient
cable
is
correctly
connected to the monitor. Check that there is
a flat signal in the ECG window. If no signal
appears, contact your Mdoloris agent.
An ECG signal is detected but seems to
be incoherent (flat, irregular, interfered,
etc).
Check that the cables and connectors are in
good working order.
ECG
waves
seem
physiologically
incorrect.
Check that electrodes are properly placed
along an imaginary line through the heart
(acquisition of an electrical QRS axis).
See § 3.3
The Mdoloris Medical Systems software
does not start automatically when the
monitor is booted.
Reboot the monitor using the switch on the
front. If the problem persists, contact your
Mdoloris Medical Systems representative.
The ANI Monitor V2 shuts down by itself
without reason.
Check that the power supply cable is
connected to the monitor and reboot the
monitor as explained here (§ 4). If the
problem persists, contact your Mdoloris
representative.
The monitor doesn’t boot.
Check that the battery's power indicator is on
when the monitor is connected to a power
supply. Check the power cable is correctly
connected. If the problem persists, contact
your Mdoloris agent.
The touch screen does not work.
Reboot the monitor using touch-sensitive
switch situated bottom center of the screen (§
4). Contact your Mdoloris Medical Systems
agent.