MDH PCBL 1610, Руководство пользователя

Страница: 13 / 18

13
Battery removal
In order to remove the batteries loosen the socket head cap screw and pull out the battery tray.
Battery
The wheelchair is equipped with two 12 V maintenance-free batteries.
In order to obtain maximum efficiency of your battery please, follow the instructions below:
1. Charge each battery before the first use. The batteries will reach 90 % of their capacity.
2. Use the power chair moving slowly not far away from the place where you can charge the batteries again until
the batteries discharge completely. Then charge them again for 9-10 hours.
3. After four or five such charging cycles the batteries should top off at 100% charge capacity and last for long
time.
The batteries are equipped with overload protector (50AH) which automatically disconnects a load when current
exceeds a predetermined value.
When the wheelchair is overloaded, the overload protector will spring up and disconnect a load. If the motor is
overloaded, stop the wheelchair and wait till the motor is cooled down. Then, push down the overload protector
and reactivate the wheelchair. If it is not possible to reactivate the wheelchair, please, contact the service point.
Socket head cap screw
Battery tray