www.marketdirect.com.au
Ph: 1300 494 494
9
Vehicle Electrical Requirements
Brake Controller
All MDC campers and campers require an electric brake controller to be fitted to the tow vehicle by law.
There is a wide range of controllers available that are suitable.
Correct Vehicle Wiring for MDC Camper
If your camper is fitted with a breakaway system (Cruizer HS, Robson XTT), to comply with national laws on
breakaway systems, you must supply a maintenance charge to the battery/batteries that power the system should it
be activated. In all MDC products, the breakaway is powered by the house batteries in the camper. For this purpose
and Anderson plug connection is fitted to all MDC campers on the drawbar. Your vehicle will need to be fitted with
a power supply to a 50 amp Anderson plug near the towbar so the trailer can be connected. The vehicle only needs
to supply power while it is running so a voltage sensitive relay or switching device may be used to protect the start
battery when the car engine is stopped.