MD mXion KBM, Руководство пользователя

Страница: 18 / 21

18
KBM
S = Default, A = Analog operation usable
CV Description S L/S Range Note
120 Switching address high 0 1 – 2048 Switch address for manual triggering.
If <256, just enter in CV121.
121 Switch address low 1
122 Servo position above 1 88 √ 0 – 255 Servo position in degrees
123 Servo position below 1 45 √ 0 – 255 Servo position in degrees
124
Servo position above 2
88 √ 0 – 255
Servo position in degrees
125 Servolage bottom 2 45 √ 0 – 255 Servo position in degrees
126
servo speed
30 √ 0 – 255
Time base 1ms / value
127 Servo hold time 10 √ 0 – 255 Holding time Servo position after reaching
the end position
Time base 0.1 sec./value
128 Servo wait 5 √ 0 – 30 Pulse Waiting Time (0-5
➔
digital servo, 5-20
➔
analog servo)
129
Nachwippen
0 √ 0/1
Activate / deactivate follow-up function
130 Nachwippweg 20 √ 0 – 255 In degrees to the end position
131
Nachwippgeschwindigkeit
7 √ 0 – 255
Time base 1ms / value
132 Servo 1 delay 0 √ 0 – 255 Delay to CV137
Time base 0.1 sec./value
133 Servo 2 delay 0 √ 0 – 255 Delay to CV137
Time base 0.1 sec./value
134
Dimming value A1
100 √ 0 – 100
In percent to the track voltage
135 Dimming value A2 100 √ 0 – 100 In percent to the track voltage
136
flashing frequency
7 √ 0 – 255
Time base 0.1 sec./value
137 Flashing before lowering 50 √ 0 – 255 Time base 0.1 sec./value
138 sound selection 0 √ 0 – 3 0 = DB electronically
1 = RhB / SBB electronically
2 = DR / HSB / DB mechanical
3 = USA electronically
Value change changes CV136,139,142 to
ideal value once. Adaptation possible
139 Stroke distance 40 √ 0 – 255 Time base 10ms / value
140
volume
255 √ 0 – 255
Poti is detected automatically
141 Blocking time contacts 32 √ 0 – 255 Contact blocking time after exit through
contacts (wait time for neutral triggering)
Time base 0.25 sec / value
142
Blink when beacons down
0 √ 0 – 3 If barrier below is down,
0 = sound off, lamps on permanently
1 = sound on, lamps on permanently
2 = sound off, lamps flash
3 = sound on, lamps flash