Settings
There are 3 setting menus, all accessible with minimal menu diving, they are
Parameter Settings
,
Channel Settings
and
Global Settings
.
Parameter Settings
Parameter settings affect the selected parameter only. Usually these are modulation
settings, trigger settings or other related settings to how the parameter affects
waveform generation. To access a parameters settings, go to the desired parameter on
the desired channel and then simply press the
ROTARY ENCODER
.
Modulation
As the standard modulation settings are the most common, these are described below.
For parameters with no modulation settings (e.g. the Recorder, or S&H) see their
description directly in the Parameter Guide.
Modulation
Function
Description
Source
Sets the modulation source, this can be any of the internal or
external channels.
Type
LINEAR
or
EXPONENTIAL
Index
A percentage value between 0 and 100, higher indicates more
modulation
Offset
Offsets the incoming source signal from -50% to +50%.
Channel Settings
Channel settings affect individual channels only. To access the channel settings, go
to a desired channel and then double tap the
SELECT
button. The current channel
settings include:
Function
Description
Mute
Mutes the channel
Polarity
Toggles between
Bipolar
and
Polar
modes. Note: during recording or
playback this option is disabled.
Record
Stop Mode
Adjusts the channels Record Stop Mode behaviour
Clear Mods
Removes all modulations for a channel
Clear
Clears the channel and resets it back to the default state
Global Settings
Global settings affect the entire operation of the device, irrespective of channel.
Global settings are accessed by holding
SELECT
and pressing the
ROTARY ENCODER
on
the main channel screen. The current global settings include:
