Controls
The following table represents controls for the primary channel screen:
Buttons
Function
ROTATE ENCODER
Adjust Selected Parameter
PRESS ENCODER
Enter Parameter Settings (Modulation or otherwise)
FRQ
Select Frequency Parameter
WAV
Select Waveform Parameter
AMP
Select Amplitude Parameter
MOR
Select Morph Parameter
PHA
Select Phase Parameter
OFF
Select Offset Parameter
A
Select A Parameter
B
Select B Parameter
HOLD A + ROTATE ENCODER
Change Custom
A
Parameter
HOLD B + ROTATE ENCODER
Change Custom
B
Parameter
SELECT* + A (1)
Select Channel 1
SELECT* + B (2)
Select Channel 2
SELECT* + WAV (3)
Select Channel 3
SELECT* + FRQ (4)
Select Channel 4
SELECT* + AMP (5)
Select Channel 5
SELECT* + MOR (6)
Select Channel 6
SELECT* + PHA (7)
Select Channel 7
SELECT* + OFF (8)
Select Channel 8
HOLD PRESS ENCODER
Enter Global Settings
DOUBLE TAP SELECT
Enter Channel Settings
*
: TAP or HOLD
The following table represents controls for general navigation:
Buttons
Function
ROTATE ENCODER
Adjust Selected Value
PRESS ENCODER
Select Value / Confirm Value
SELECT
Escape or Back
