MD Helicopters 369E, Руководство по летной эксплуатации вертолетов

Страница: 217 / 264

CSP − E − 1
Optional Equipment
ROTORCRAFT FLIGHT MANUAL
MD 500E
(Model 369E)
Revision 14
9 − 1
FAA Approved
SECTION IX
OPTIONAL EQUIPMENT
9 − 1. GENERAL INFORMATION
This section provides general supplemental information on optional equipment
for the MD 500E Helicopter. The information includes a listing of usable op-
tional equipment and compatibility of combined equipment on the helicopter.
Supplemental data is prepared and included in this section whenever the in-
stallation of that equipment affects the FAA Approval Data for Limitations
(Section II), Emergency and Malfunction Procedures (Section III), Normal Pro-
cedures (Section IV), and Performance Data (Section V).
The Flight Manual Supplemental Data is to be used in conjunction with the
basic Flight Manual data and takes precedence over that data when the equip-
ment is installed.
Be sure to include a review of the appropriate flight manual
supplemental data for type of optional equipment installed
(including STC items) as a regular part of preflight planning.
9 − 2. LISTING − OPTIONAL EQUIPMENT
Table 9−1 lists MDH optional equipment items available that require additional
operating instructions. This table does not include non−MDHI STC items that
may be FAA approved for use. Other optional equipment items may be found
in the HMI. These kits are approved and usable on the 369E Helicopter
Equipped with either the Rolls Royce 250−C20B or C20R/2 engines.
Table 9−2 lists optional equipment kits and flight manual supplements ap-
proved and usable on the 369E Helicopter equipped with the 250−C20B engine
only. This table does not include non−MDHI STC items that may be FAA ap-
proved for use.
SPECIAL NOTE:
Items in the table marked with an asterisk (*) are optional equipment items that
have had their supplemental data incorporated into the main body of the flight
manual and are identified by the statement, ‘‘If installed’’.
CAUTION