
R
S
40
8-AIR INLETS
HOOD VENTILATION OUTLETS
Both in the case of installation with natural ventilation and if using the Comfort Air kit for forced ventilation,
it is mandatory to install
the manufacturer’s hood ventilation vents or vents that can guarantee the same kind of operation and the same air
passage section.
The producer is not liable for any damage to the structure or to the electric components caused by failure to comply with this warning.
For correct operation of ambient ventilation, remember that:
•
Lower part “
R
” of the cladding
must have
a convective air inlet opening of no less than 400 cm
2
•
Upper part “
S
”
must have
a relief outlet (in addition to the ducted outlets) of at least 520 cm
2
to release the residual heat that has
accumulated inside the cladding into the room.
This practice - as well as assuring perfect operation of the product - makes it possible to recover some of the structure’s heat, which would
be lost if it remained inside the cladding.
For a better understanding of the amounts, dimension and function of the ventilation outlets to be installed on the cladding, we provide
three examples below of installation with the relative outlets.