MCZ EGO AIR 8 M2, Руководство по установке, Страница: 21 / 40

19
3-DRAWINGS AND TECHNICAL SPECIFICATIONS
Technical Dept. - All rights reserved - Reproduction prohibited
TECHNICAL SPECIFICATIONS EGO AIR 8 M2
Energy Efficiency Class A+
Nominal output power 8.1 kW (6966 kcal/h)
Minimum power output 2.3 kW (1978 kcal/h)
Efficiency at Max 90.9%
Efficiency at Min 92.6%
Temperature of exhaust smoke at Max 188 °C
(1)
Temperature of exhaust smoke at Min 89°C
(1)
Particulate / OGC / Nox (13%O
2
) 17 mg/Nm3 - 1 mg/Nm3 - 142 mg/Nm3
CO at 13% O
2
at Min and at Max 0.043 – 0.002%
CO
2
at Min and at Max 6.4% - 14.0%
Recommended draught at Max*** power 0.10 mbar - 10 Pa***
Minimum draught allowed at minimum power 0.05 mbar - 5 Pa
Smoke mass at Min and at Max 2.7 - 4.3 g/sec
Hopper capacity 39 litres
Type of pellet fuel Pellet diameter 6 mm and size 3 - 40 mm
Pellet hourly consumption Min ~ 0.5 kg/h* - Max ~ 1.8 kg/h*
Autonomy At min ~ 50 h* - At max ~ 14 h*
Heatable volume m 3 147/55 – 231/35 – 405/20 **
Combustion air inlet Ø 50 mm
Smoke outlet Ø 80 mm
Air inlet 80 cm
2
Rated electrical power (EN 60335-1) 62 W (Max 380 W)
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 127 kg
Weight with packaging 137 kg
Distance from combustible material (back/side/under) 40mm/100mm/0 mm
Distance from combustible material (ceiling/front) 800mm/1000 mm
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m
3
(respectively 55-35-20 W per m
3
)
***Value recommended by the manufacturer (non-binding) for optimal product operation
Tested according to EN 14785 in accordance with European regulation for Construction Products (EU 305/2011)
(1)
To properly size the chimney (in accordance with EN 13884-1), use the smoke temperature exactly detected at the
outlet of the appliance, or the above stated temperature increased by 20% (e.g. stated temperature 100°C: product outlet
temperature 120°C)