3.
INSTALLATION INSTRUCTIONS
Before installing the oven check the area in which you
wish to position it (figure 1/2), taking into account the
minimal room volume of 132 m
3
and the total overall
dimensions of the oven itself (see page 3).
Using the instructions and heights shown, identify where
to:
Make the hole for the external combustion air inlet
(figure 1/3 point A);
Make the hole for the smoke connection passage
(figure 1/3 point B).
Always position the external and internal combustion air
inlet close to the ceiling and equal to the dimensions
shown in the technical data (see page 3).
Build a safe, horizontal support surface if one is not
already present (figure 1/4).
The dimensions of the base must correspond to the
external measurements of the oven with added thickness
for insulation. (see Fig.1/10).
Fig.1/2
Fig.1/3
Fig.1/4
