861-311
P2007 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Installation of the Receiver:
•
Attach the antenna to the receiver that it has a vertical position (1).
•
Attach the receiver either to a computer with the USB-cable (2) or to an external monitor or TV with the
audio / video-cable (3).
•
Connect the receiver with its power supply and the power supply with an electric outlet. Now the
receiver is ready for operation.
•
Switch on the computer or the TV respectively and select the AV mode.
•
Adjust the receiving channel of the receiver that it matches the transmitting channel of the camera (4).
•
Now the transmitted picture should be shown on the screen.
•
Adjust the brightness, the contrast and the color at the monitor or the TV respectively that there is an
optimal picture produced.
Enable Receiving Channels and the LOOP-Function:
1
The receiving channels 1 to 4 can be enabled or
disabled separately. If a channel is enabled it is
considered by the channel button.
2
The LOOP-function is enabled in L and disabled in
M. If it is enabled it toggles every 5 seconds
between the activated channels. This function
makes the simultaneous usage of multiple
cameras possible.
