CUBEScan
TM
BioCon-900S Operator’s Manual
Page 29
5.9
FETCH A MISSING DATA
If you did not save a scan result and return to the Home screen, the
Missing Data
icon (
) appears on
the
Home screen. Tap the
Missing Data
icon (
) to fetch the unsaved scan result. The Scan Result
screen on the missing data appears. The performances below make the
Missing Data
icon(
) disappear.
1) Fetch and save the missing scan result.
2) A new normal scan is performed.
Figure 35 Home Screen
5.10
FINISH THE MEASUREMENT
After finishing scanning, take the probe away from the patient and then wipe the ultrasound gel off the
probe. See the section “8.3 CLEANING & DISINFECTION”
When the probe is not in use, press the
Power
Button
(
) twice to place the system in sleep mode and
then mount it for charging internal battery in the Charger.
5.11
MANAGE SAVED SCAN RESULTS
1) The scan results are saved to the internal memory of BioCon-900S Probe. If you scan the patient
several times using the probe, the lagest result is saved. Information can be entered and modified before
the scan result is saved, but once the scan result is saved, patient information can not be modified
2) If you want to delete the saved scan result, see the section “5.11.2 DELET A SAVED SCAN RESULT”
5.11.1
REVIEW A SCAN RESULT
1)
The Review screen is displayed when you tap the Review icon (
) on the Home screen.
2)
The Review screen opens, it shows the urine volume, ultrasound images and other saved information.
3)
Previous & Next icon (
,
) allow you to review the scan results of the other patients.
4)
Delete & Exit icons (
,
) allow you to delete the current reviewing results or return to the Home
screen.
5)
Tap the (1) area to review the information you entered for the patient.