MCS mobilestor Скачать руководство пользователя страница 33

MobileStor Installation Guide 

31

Limited Warranty

This is your MCE Technologies, LLC (MCE) three year limited warranty.  The original purchaser (Pur-

chaser) must present a dated proof of purchase (Bill of Sale) to obtain warranty service.

This product is warranted by MCE to be free from defects in material and workmanship for three (3) years 

from the date of purchase by the Purchaser.

Purchaser's sole remedy under an MCE warranty shall be, at MCE's sole election, refund, repair or re-

placement as provided in this warranty.  An MCE warranty shall not apply to any failure or defect caused by 

misuse, abnormal use, neglect, abuse, alteration, improper installation, unauthorized repair or modification, 

improper testing, accident or causes external to the product such as but not limited to excessive heat or 

humidity, power failure, or surges, or improper installation, or damage arising from improper packaging 

during transport; and damage resulting from causes, including without limitation, lack of technical skill, 

competence, or  experience of the user.  This warranty shall not be enlarged, diminished or affected by, and 

no liability shall arise out of, MCE's rendering of technical advice or providing information to Purchaser.  

Service by anyone other than MCE authorized service personnel voids any MCE warranty.  MCE  makes 

no representations or warranties, express or implied, regarding the fitness of a product for any particular 

purpose, or that a product is compatible with any particular hardware or software.

MCE's sole and exclusive maximum liability for any claim by Purchaser arising out of Purchaser's pur-

chase of a product and/or the above warranty shall not in any event exceed the actual amount paid by 

Purchaser for the product.  In no event shall MCE be liable for any direct, indirect, incidental, collateral, 

exemplary, consequential or special damages or losses arising out of Purchaser's purchase and/or use of 

products, including, without limitation, loss of use, profits, goodwill or savings, or loss of data, data files, 

or programs that may have been stored by a user of the product.

Continued use or possession of a product after expiration of its warranty period shall be conclusive evidence 

that the warranty is fulfilled to the full satisfaction of Purchaser.

MCE shall honor the terms of an MCE warranty as described herein, provided that the defective product 

is sent in its original packaging to MCE, together with a copy of the dated proof of purchase on which the 

product appears, transportation and insurance prepaid, within the warranty period, and if the product is 

found by MCE to be defective within the terms of the warranty.  Prior to returning any product to MCE, 

Purchaser must obtain a Return Merchandise Authorization (RMA) number from MCE.  No product shall 

be accepted for return, repair or replacement without an RMA number visibly written on the outside of its 

original packaging or comparable packaging affording an equal degree of protection.  MCE shall not be 

responsible for merchandise sent to MCE improperly packaged.  Purchaser must prepay shipping charges 

for merchandise shipped back to MCE for warranty service.  Prior to returning the product, Purchaser 

must, if possible, remove any and all programs and data from any storage media.  Replacement products 

and parts used to repair products may be similar new or other than new items.  Replaced products  and 

parts shall become the property of MCE.  If any product returned by Purchaser to MCE for repair or 

replacement is not defective within this warranty, MCE shall so advise Purchaser and thereafter MCE 

shall handle such products in accordance with Purchaser's instructions and at Purchaser's cost, after re-

imbursement to MCE by Purchaser of freight charges at then current rates, and examination and testing 

expenses at then current rates ($60.00 per hour as of January 2001).  Prices, terms and conditions are 

subject to change without notice.

Non-defective purchases which are returned to MCE must be returned within thirty (30) days of purchase.  

For non-defective purchases which are returned or refused by the Purchaser, MCE will, at its discretion, 

issue a credit or refund for the purchase price of the goods, less all shipping charges incurred in the ship-

ment and a restocking fee of no less than fifteen percent (15%) of the retail price of the goods.

Содержание mobilestor



































Отзывы: