MCS mobilestor Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 34

MCS mobilestor Скачать руководство пользователя страница 14

PowerBook G3 (2000)

12

Introduction to PowerBook 2000 Installation

This chapter details the procedure for installing an MCE hard drive up-

grade kit into a PowerBook G3 (2000 release; a.k.a. FireWire, Pismo).

Note:

To distinguish this PowerBook G3 from other PowerBook

G3 models, note that this PowerBook has two built-in FireWire

ports ( ).

MCE strongly recommends that the installation be performed by a

qualified technician. The installation procedure involves disassembling

the PowerBook and exposing its sensitive electronics. This is a delicate

process and, if not performed properly, could cause damage to the Pow-

erBook. These installation instructions are given for those who under-

stand these risks. If performed correctly, these instructions will guide an

individual step-by-step through a successful installation of the new hard

drive.

The new hard drive comes formatted and initialized with a Macintosh

driver, but requires the installation of appropriate Mac OS operating

system software for use in the PowerBook. See the PowerBook User’s

Manual for Mac OS operating system installation procedures

.

If any difficulty is encountered during the installation of the hard drive,

you may receive technical assistance by calling (949)458-0800 within the

United States or Canada, or by sending email to [email protected].

!

«
...
12
13
14
15
16
...
»

Содержание mobilestor



































Отзывы:

Нет отзывов