McQuay MWM 007F, Руководство пользователя

Страница: 95 / 108

T T
T T
Trrrrroub oub
oub oub
oubleshooting leshooting
leshooting leshooting
leshooting
PRESSURE PROBABLE CAUSE
Data
Circuit
To
o
Lo
w
A Lit
tle
Lo
w
Normal A Lit
tle
High To
o
High
High Side
Low Side
●
●
1. Overcharged with refrigerant.
2. Non-condensable gases in refrigerant circuit (e.g.oil)
3. Obstructed air-intake / discharge.
4. Short circuiting of hot air outdoor unit.
High Side
Low Side
●
●
1. Poor compression/ no compression (compressor
defective).
2. Check valve stick in open position.
3. Reversing valve leaking.
High Side
Low Side
●
● 1. Undercharged with refrigerant.
2. Refrigerant leakage.
3. Air filter clogged/ dirty (indoor unit).
4. Indoor
fan locked.
5. Defective defrost control, outdoor coil freeze up
(heating).
6. Outdoor fan locked (heating).
High Side
Low Side
●
● 1. Outdoor fan blocked (cooling).
2. Outdoor coil dirty (cooling).
3. Indoor fan locked (heating).
4. Indoor filter clogged/ dirty (heating).
5. Non-condensable gases in refrigerant circuit (e.g. air)
High Side
Low Side
●
●
1. Air intake temperature of indoor unit too high.
By means of pressure readings :
BY MEANS OF DIAGNOSIS FLOW CHART
Generally, there are two kinds of troubles, i.e. starting failure and insufficient cooling/heating. “Starting
Failure” is caused by electrical defect while “Insufficient Cooling/Heating” is caused by improper
1. Diagnosis Of Electric Circuit
No Cooling / Heating
Unit fail to start
Check power supply
- voltage
- phase
- frequency
Check settings of remote control box
Compressor fails to start
Check circuit breake & fuse
Check power source cord
Fan fails to start
Fan Motor Capacitor defective
Loose Connections,
Contactors
Irregular motor resistance( Ω )
& insulation (M Ω )
Replace Fan Motor
Compressor Motor damaged ( to replace compressor
Thermostat setting too high
Protection Device Actuated
Reset
Compressor locked (to replace compressor)
Voltage supply not within range
Check motor resistance (
Ω
) and insulation (M
Ω
)
Compressor
Capacitor Defective
Loose Connections,
Improper wiring
Regular but fails
to start
Irregular
93