1-2
CONTENTS
- Safety Precautions
page
0
2
- Installation Diagram
page
0
3
- Outline And Dimensions
page
0
4
- Installation of Indoor Unit
page 5
- Installation Of Outdoor Unit
page
0
9
- Refrigerant Piping Work
page 9
- Electrical Wiring Connection
page 10
- Vacuuming and Charging
page 13
SAFETY PRECAUTIONS
Before installing the air conditioner unit, please read the following safety precautions carefully.
!
Warning
•
Installation and maintenance should be performed by qualified persons who are familiar with local code and
regulation, and experienced with this type of appliance.
•
All field wiring must be installed in accordance with the national wiring regulation.
•
Ensure that the rated voltage of the unit corresponds to that of the name plate before commencing wiring work
according to the wiring diagram.
•
The unit must be GROUNDED to prevent possible hazard due to insulation failure.
•
All electrical wiring must not touch the refrigerant piping or any moving parts of the fan motors.
•
Confirm that the unit has been switched OFF before installing or servicing the unit.
IMPORTANT
DO NOT INSTALL OR USE THE AIR CONDITIONER UNIT IN A LAUNDRY ROOM.
- Accessory Parts
page 13
- Indicator Lights
page 14
- Overall Checking
page 15
- Standard Operation Conditions
page 15
- Auto Random Re-start Function
page 15
- Service And Maintenance
page 16
- Trouble Shooting
page 16
!
Caution
Please take note of the following important points when installing.
•
Do not install the unit where leakage of flammable gas may occur.
If gas leaks and accumulates around the unit, it may cause fire ignition.
•
Ensure that the drainage piping is connected properly.
If the drainage piping is not connected properly, it may cause water leakage which will dampen the
furniture.
•
Do not overcharge the unit.
This unit is factory pre-charged. Overcharge will cause over-current or damage to the compressor.
•
Ensure that the units panel is closed after service or installation.
Unsecured panels will cause the unit to operate noisily.
CK20A(1-16)ENG
2/1/01, 10:15 AM
2
