McNeilus HD Rear Loader Скачать руководство пользователя

Страница: 82 / 132

Rear Loader

Operation

4.5

Lateral Protection Device

The lateral protection device (LPD) is designed to be

removed for service or rotated up or tilted forward for access

to components on the vehicle such as tool boxes, battery

boxes, hydraulic oil tanks.

IMPORTANT:

The only time the

LPD should be removed, rotated, or tilted is when the vehicle

is stationary. Return the LPD to its original position before

moving the vehicle or going on route.

Remove the LPD for Service

1. To remove the entire device to perform service work on

the vehicle, remove all four (4) hinge pins and move the

device out of the way.

2. Reinstall the device and all four (4) hinge pins to return

the LPD to its original position before moving the vehicle

or going on route.

Rotate the LPD Up

1. To rotate the lateral protection device up for access to

components, holding onto the rail assembly, remove the

lower hinge pin

from both LPD mount supports.

2. Rotate the rail assembly up until the open holes on the

LPD mount support and the chassis mount align.

3. Install each lower hinge pin through the open holes in

the top hole of each LPD mount supports and mount

weldments (Figure 32).

Figure 32

4. Reverse all steps to return the LPD to its original position

before moving the vehicle or going on route.

Tilt the LPD Down

1. To tilt the lateral protection device down for top side

access to frame mounted components, holding onto the

rail assembly, remove the top hinge pin from both LPD rail

supports.

Содержание HD Rear Loader





































































































































Результаты поиска

Содержание HD Rear Loader

Отзывы:

Похожие инструкции для HD Rear Loader

Бренды по названию

Популярные бренды

McNeilus HD Rear Loader, Руководство оператора

Результаты поиска

Содержание HD Rear Loader

Отзывы:

Похожие инструкции для HD Rear Loader

Бренды по названию

Популярные бренды