background image

  USB-80 Mixer Amplifier

               

Owners Manual  

       

 

 

9

 
 
 
 
 
 
Using the IR Remote Control 
The included IR remote control will allows remote operation of 
all front panel controls, plus additional functions. 

 

 
Shaded area buttons labeled 0~9 –Allow individual track selection by number. Simply key in the 
desired track. Approximately one second after depressing the last button, the MP

P

3

 player will play the 

desired track 
 
Four arrow buttons on bottom – Replicates controls located on the front panel of the MP

3

 player 

 
RAN – Selects random function. Pressing this button will cause the player to randomly select the files on 
the media instead of playing them in order. The display flashes the track number while in the random 
mode. 
 
A>B – Allows the user to select a desired clip of any length to repeat continuously. While clip is playing, 
depress the A>B button one time. Wait a few seconds and press the button again. The selected clip will 
then continuously repeat. This will occur until the A>B button is depressed a third time to exit this mode.  
 
REP – Replicates the REPEAT control located on the front of the MP

P

3

 player. 

 
PROG – Allows a specific list of files to be played in a preset order. Depress the PROG button one time to 
enter the program mode. Once in this mode, use the 0~9 keys to select the first song to be played, then 
pres the PROG button. Use the 0~9 keys again to select the second song and pres PROG again. Continue 
to do this until all desired songs are selected, then press the PROG button twice.  Then press the PLAY 
button to begin playing the sequence. 
Note: The program sequence will be lost if the media is removed from the amplifier, or if the power is 
switched off. 
 
USB/SD – If media is plugged into both the USB and SD/MMC card slot, this button will toggle between 
the two. 
 
 

Amplifier Specifications 

Power output: 

40W RMS, driving an 8

Ω

 load 

Output transformer taps: 

4

Ω

, 8

Ω

, 16

Ω

 and 70V 

Frequency response: 

50Hz ~ 20KHz ±3dB 

THD: 

<1.0% at rated output at 1KHz 

Power requirements: 

120VAC, 60Hz, 120W 

 

12VDC, 6A (max) 

Dimensions:  

4 1/8" (H) x 15" (W) x 10" (D) 

Weight: 14 

lbs. 

 

Содержание USB-80










Отзывы: