MCM Electronics iRIS 8, Руководство пользователя

Страница: 8 / 16

page 7
Isolate a Section from being Armed
Notes:
1. When entering section numbers a two digit number eg 01 or a single 1
may be used. Single digit entry. i.e. the leading zero is ignored)
2. Only valid section numbers may be entered.
3. Sections are automatically de-isolated when the system is changed to
OFF mode.
4. Depending on technician setup, isolations may be reported to the
Central station.
Key Sequence Operation
Example shows a User Code 1 2 3 4
1 2 3 4 isolate being used to enter Isolation mode.
0 4 Sections 4 and 7 are being Isolated.
0 7
ON or part When desired sections are isolated
Disarming the System - OFF Mode
Notes:
1. Only a valid User Code can change the system between OFF, ON and
Partial modes.
2. Fire, Panic and Tamper inputs, if fi tted, are always armed.
3. This key sequence also acknowledges or silences the siren / strobe if a
Fire, Panic or tamper alarm is actuated.
Key Sequence Operation
Example shows a User Code 1 2 3 4
1 2 3 4 Off being used to change the system to
OFF mode