McLaughlin New Way K-PAC KP03, Руководство пользователя

Страница: 33 / 95

KP03 Mini Apartment Compactor
LOCKOUT/TAGOUT
28
Copyright
©
7/2021 K-PAC
™
Compactors, a product of McLaughlin Family Companies
All Rights Reserved
REMOVE LOCKOUT/TAGOUT
The removal of LOCKOUT/TAGOUT should be performed by the same authorized employee that it was
applied by. Use the following steps to remove LOCKOUT/TAGOUT and restore the compactor back to service.
• Check the compactor and the immediate area around to ensure that nonessential items are removed from
the area.
• Check the compactor and surrounding area to verify that all components are intact.
• Check the work area to ensure that all affected employees are safely positioned or removed from the area.
• Verify that the controls are in neutral.
• Remove the LOCKOUT/TAGOUT lock
(Figure 3, 3) and tag (Figure 3, 4) that secured the lever on the
Main Power Disconnect.
• Switch the lever (Figure 3, 2) to the ON position to enable the electrical power supply to the Power Pack.
• Insert the key into the ON-OFF switch (Figure 5, 1) on the control panel or remote. Enable the Power Pack
by turning the ON-OFF switch to ON.
• Reassess area to determine that the equipment is safe for operation.
• Notify affected employees that the servicing or maintenance is completed and the compactor is ready for
use.
The removal of some forms of blocking may require re-energizing the
compactor before safe removal.