McLaughlin McL-12HB ZIPPER, Компоненты и руководство по ремонту

Страница: 25 / 25

WARRANTY
RETURN GOODS POLICY
8.1.0
LIMITED WARRANTY
The Manufacturer warrants its products to be free
from defects in material and workmanship for a
period of
twelve months from the date of shipment from the
factory. Hole Hammer pistons, bodies, and nose
pieces are warranted to be free from defects in
material and workmanship for a period of three
years from the date of shipment from the factory.
The Manufacturer shall not be responsible for any
damage resulting to or caused by its products by
reason of installation, improper storage, unautho-
rized service, alteration of the products, neglect
or abuse, or use of the product in a manner incon-
sistent with its design. This warranty does not ex-
tend to any component parts not manufactured by
Manufacturer; however, Manufacturer’s warranty
herein shall not limit any warranties made by
manufacturers of component parts which extend
to Buyer.
Claims for defects in material and workmanship
shall be made in writing to Manufacturer within ten
days of discovery of defect. Manufacturer may
either send a service representative or have the
product returned to its factory at Buyer’s expense
for inspection. Upon notification of defect, Manu-
facturer will issue a return goods authorization
number to Buyer. The return goods authorization
number must accompany the product returned. If
judged by the Manufacturer to be defective in
material or workmanship, the product will be re-
placed or repaired at the option of the manufac-
turer, free from all charges except authorized trans-
portation. Buyer shall be responsible for all main-
tenance services consisting of lubrication and
cleaning of equipment, replacing expandable parts,
making minor adjustments, and performing oper-
ating checks, all in accordance with procedures
outlined in Manufacturer’s maintenance literature.
THE FOREGOING WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES AND NO REPRESENTA-
TIONS, GUARANTEES, OR WARRANTIES, EX-
PRESS OR IMPLIED, (INCLUDING BUT NOT LIM-
ITED TO A WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A
PARTICULAR PURPOSE), ARE MADE BY THE
MANUFACTURER IN CONNECTION WITH THE
MANUFACTURE OR SALE OF ITS PRODUCTS. NO
EMPLOYEE, DISTRIBUTOR, OR REPRESENTATIVE
IS AUTHORIZED TO CHANGE THIS WARRANTY ON
BEHALF OF MANUFACTURER THE REMEDIES OF
BUYER SET FORTH HEREIN ARE EXCLUSIVE AND
ARE IN LIEU OF ALL OTHER REMEDIES. THE LI-
ABILITY OF MANUFACTURER WHETHER IN CON-
TRACT, TORT, UNDER ANY WARRANTY, OR
OTHERWISE SHALL NOT EXTEND BEYOND ITS
OBLIGATION TO REPAIR OR REPLACE, AT ITS
OPTION ANY PRODUCT OR PART FOUND BY
MANUFACTURER TO BE DEFECTIVE IN MATERIAL
OR WORKMANSHIP. MANUFACTURER SHALL NOT
BE LIABLE FOR COST OF INSTALLATION AND/OR
REMOVAL OR BE RESPONSIBLE FOR DIRECT, IN-
DIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES
OF ANY NATURE.
GENERAL RETURNS OF MERCHANDISE
1. All returns must be pre-authorized
A. Please call our parts department for an
RGA number
B. Please include RGA number on the
outside of box
C. Include any required paper work or
special instructions
D. Items returned without an RGA number
will not be accepted
2. All returns are subject to a 20% restock
charge.
3. Special items are non-returnable
A. Non-stock parts
B. Custom parts
C. If you are unsure about a parts status
when ordering, ask your McLaughlin
representative if the item fits on of the
above conditions.
4. Items must be returned within thirty days of
original order date.
5. Items not returned within 30 days from the
date of RGA is issued will not be accepted.
6. The item(s) must be in new condition.
Used item(s) are not returnable.
February 8, 2005