McIntosh XRT2.1K Скачать руководство пользователя страница 2

2

Caution: The XRT2.1K weight is 353.2 pounds 

(160.2 kg). It requires four or more per-

sons to safely handle the Loudspeaker 

System.

1. For additional connection information, refer to the 

owner’s manual(s) for any component(s) connected 

to the XRT2.1K Left and Right Loudspeakers.

2. The design of the XRT2.1K Loudspeaker took into 

account the acoustic characteristics of the Front 

Panel Grille and it should be attached to the Loud-

speaker for the best sonic performance.

3. If there is an obvious lack of high, mid or low 

frequencies after extended periods of overdrive, 

the Protection Device(s) may have activated. These 

devices will automatically reset when the volume 

level is greatly reduced until the output of the af-

fected Loudspeaker Driver(s) returns to normal.

4. If it should become necessary to replace the sup-

plied Input Terminal Connection Jumper Cables, 

order part number 320633SP from the McIntosh 

Parts Department:

5. When discarding the unit, comply with local rules 

or regulations. Batteries should never be 

thrown away or incinerated but disposed 

of in accordance with the local regulations 

concerning battery disposal.

6. For additional information on the XRT2.1K and 

other McIntosh Products please visit the McIntosh 

Web Site at www.mcintoshlabs.com.

XRT2.1K Loudspeaker Unpacking Information 

Guide

    (Separate Sheet in all three Shipping Cartons)

Safety Instructions ..................................................... 2

    (Separate Sheet) ...................

Important Additional

                                    Operation Information Guide

Thank You and Please Take a Moment ...................... 2

Technical Assistance and Customer Service ............. 2

Table of Contents, General Information .................... 2

Connector Information .............................................. 3

Introduction  ............................................................... 3

Dimensions ............................................................. 4-5

Assembling the Loudspeaker ..................................6-8

Installation ................................................................. 9

How to Connect using a single Amplifier ...........10-11

How to Connect using two Amplifiers

 and Room Correction Equalizer ....................... 12-13

How to Connect using a three Amplifiers ...........14-15

Specifications .......................................................... 16

Packing Instruction ............................................ 18-19

Table of Contents

Thank You

Please Take A Moment

Technical Assistance

If at any time you have questions about your McIntosh 

product, contact your McIntosh Dealer who is familiar 

with your McIntosh equipment and any other brands 

that may be part of your system. If you or your Dealer 

wish additional help concerning a suspected problem, 

you can receive technical assistance for all McIntosh 

products at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3512

Fax: 607-724-0549

Customer Service

If it is determined that your McIntosh product is in 

need of repair, you can return it to your Dealer. You 

can also return it to the McIntosh Laboratory Service 

Department. For assistance on factory repair return 

procedure, contact the McIntosh Service Department 

at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3515

Fax: 607-723-1917

The serial number, purchase date and McIntosh Dealer 

name are important to you for possible insurance 

claim or future service. The spaces below have been 

provided for you to record that information:
Serial Number: _______________________________

Purchase Date: _______________________________

Dealer Name: ________________________________

Copyright 2018 © by McIntosh Laboratory, Inc.

General Information

Your decision to own this McIntosh XRT2.1K Left 

and Right Loudspeaker System ranks you at the very 

top among discriminating music listeners. You now 

have “The Best.” The McIntosh dedication to “Qual-

ity,” is assurance that you will receive many years of 

listening enjoyment from this unit.

Please take a short time to read the information in 

this manual. We want you to be as familiar as pos-

sible with all the features and functions of your new 

McIntosh.

Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide

Содержание XRT2.1K





















Отзывы: