11
hole, and tighten the Input Terminal cap until the
cable is firmly clamped into the terminals so the
lugs or wire cannot slip out. Refer to figures
I and J.
Note: It is important to maintain the correct polar-
ity at both ends of the Loudspeaker cables.
The XRT2.1K Loudspeaker is a Four Way Crossover-
System that has three pairs of Input Terminals (Posi-
tive and Negative) for connection to a Power Ampli-
fier.
XRT2.1K Loudspeaker Four Way System
Frequency Range
Loudspeaker Drivers
Input Terminal
Connections
12Hz - 150Hz
8 inch Woofers
SUBWOOFER
150Hz - 450Hz
6.5 inch Midrange
LOW
450Hz -2,100Hz
2.0 inch Midranges
MD/HIGH
2,100Hz - 45,000Hz 3/4 inch Tweeters
MD/HIGH
Referring to the Connection Diagram located on the
separate folded sheet “
Mc2A
”, there is one Power
Ampifier with three pairs of indentical Output Termi-
nals.
Note: If the single power amplifier used only has one
pair of Output Terminals, then use the four Jump-
er Cables supplied with XRT2.1K for connection
between its three pairs of Input Terminals.
Connections To One Power Amplifier
Loudspeaker Connection with One Power Amplifier
Figure I
Figure J
1. Connect a cable from the Power Amplifier “A”
Output Terminal Positive (+) 8 Ω Terminal to the
XRT2.1K Positive (+) 8 Ω “MID/HIGH” Terminal.
Then connect a cable from the Power Amplifier “A”
Output Terminal Negative (-) 8 Ω Terminal to the
XRT2.1K Negative (-) “MID/HIGH” Terminal.
2. In a similar manner, connect a cable from the
Power Amplifier “B” Output Terminal Positive
(+) 8 Ω Terminal to the XRT2.1K Positive (+) 8 Ω
“LOW” Terminal. Then connect a cable from the
Power Amplifier “B” Output Terminal Negative (-)
8 Ω Terminal to the XRT2.1K Negative (-) “LOW”
Terminal.
3. Also connect a cable from the Power Amplifier “C”
Output Terminal Positive (+) 8 Ω Terminal to the
XRT2.1K Positive (+) 8 Ω “SUBWOOFER” Termi
-
nal. Then connect a cable from the Power Amplifier
“C” Output Terminal Negative (-) 8 Ω Terminal to
the XRT2.1K Negative (-) “SUBWOOFER” Termi-
nal.
Содержание XRT2.1K
Страница 17: ...17...
