23
How to Operate the MVP831,
cont
picture frame at a time, and at dif-
ferent speeds.
1. When playing a DVD Disc,
press the PAUSE pushbutton to
temporarily stop play. After
PAUSE has been activated,
each additional time you press
PAUSE the disc will advance
one video frame at a time.
Note: In this mode, press either the
FF or REV pushbuttons to
move more rapidly forward or
backward a frame at a time on
a DVD.
2. Press the PLAY pushbutton to
cancel Pause and resume play-
ing a DVD.
CD Disc Pause
When playing a CD Disc, press
PAUSE to temporarily stop play.
Press the PLAY pushbutton to can-
cel Pause and resume playing.
DVD/CD Disc REV and FF
This feature allows rapid backward
or forward (REV or FF) disc play.
You have the Setup option of turning audio on or off audio
during the fast play operation.
1. Press a REV (Reverse) or FF (Fast Forward)
pushbutton to move rapidly backward or forward
through a disc. Press the same pushbutton again up to
three times, and the search speed will increase succes-
sively. An Icon will appear indicating the direction and
speed of the fast operation.
2. Cancel the REV or FF mode by pressing the Play
pushbutton and normal play will resume.
On Screen Icon Display
Three sets of On Screen Icons are available to inform you
of current operating conditions and allow activation of tem-
porary operating changes for a disc currently being played.
Press the DISPLAY pushbutton once to access the first set
of On Screen Icons. Press DISPLAY a second and third
time to access the second and third sets of icons. Press
DISPLAY a fourth time to remove the icons from the
screen. If a selection is made with an Icon, the display will
disappear. Certain On Screen Icon operations are accessed
with Remote Control pushbuttons, and only the selected
Icon will appear. Refer to figures 23, 24, 25 & 26.
Direct DVD Disc Chapter Selection
The MVP831 front panel display indicates the Disc Chap-
ter currently playing. An On Screen Icon also indicates the
DVD Chapter Number currently being played, with the
ability to select a different Chapter. Refer to Figure 24.
1. Press the DISPLAY pushbutton to access the first
group of DVD On Screen Icons.
2. Press an ARROW pushbutton to access the second
Icon from the left (C), which indicates the Chapter
Number currently playing.
3. To access a different Chapter, press a Numbered
pushbutton(s) and then SELECT.
Direct CD Track Selection
Selecting a different track on a CD requires only a Number
pushbutton to be pressed. A different Track can be selected
during play. In the STOP Mode, select a Track Number and
then Press PLAY to start playing the disc with the selected
track. The CD track number and elapsed time will also ap-
pear on the MVP831 Front Panel Display. Refer to figure
23 and 24.
1. Press a Number pushbutton for the CD track you wish
to play.
2. To display the track number currently being played,
press DISPLAY to access the first group of On Screen
Icons for CD.
3. The first Icon on the left (T) will indicate the current
track being played and the second Icon will indicate
the elapsed time.
4.To access a track using the On Screen Icon, press a
Numbered pushbutton(s) to access a different track and
then press SELECT.
Figure 24
Figure 25
Figure 26
Figure 23
