7
Mounting the Tweeter Dual Angle Bracket
Mounting the Tweeter Surface Bracket
Mounting the Tweeter Flush Bracket
Installation, cont
Figure 5
Bent push on
connector
Dual Angle Mounting
Bracket inside view
Figure 4
Drill bit
guides for
hookup
cable and
mounting
screws
Figure 6
123456789012345678901234567890121234567890123456789
123456789012345678901234567890121234567890123456789
123456789012345678901234567890121234567890123456789
Dual Angle
Mounting
Bracket
Mounting
Surface
Tweeter
Tweeter
Lug
Figure 7
123456789012345678901234567890121234567890123456789
123456789012345678901234567890121234567890123456789
123456789012345678901234567890121234567890123456789
Surface
Mounting
Bracket
Mounting
Surface
Tweeter
Tweeter
Lugs
Spring Clips
Mounting
Surface
Tweeter
Surface
Mounting
Bracket
Figure 8
123456789012345678901234567890121234567890123456789
123456789012345678901234567890121234567890123456789
123456789012345678901234567890121234567890123456789
Tweeter
Lugs
Flush
Mount Cup
Two different tweeter mounting angles are possible with
the bracket supplied. Choose the one which best fits the ve-
hicle. Refer to Figures 4 and 6.
1. Drill holes with an appropriate size drill bit in the
mounting surface for the two tweeter wires and the two
bracket mounting screws. Also drill corresponding
holes in the mounting surface.
2. Secure the bracket with two of the screws supplied.
3. Install the wires to the tweeters by pressing the push-on
connectors onto the tweeter connecting lugs. Observe
polarity with Red cables to the Positive (+) lugs and
Black cables to the negative (-) lugs.
4. Carefully bend the push on connectors inward to allow
the wiring to fit in the bracket. Do not bend the tweeter
connecting lugs. Refer to Figure 5.
5. Align the tweeter with the bracket and snap in place.
1. Drill holes in the mounting surface with an appropriate
size drill bit for the two tweeter wires and the two
bracket mounting screws using the round and rectangu-
lar holes in the mounting bracket as a guide.
2. Secure the bracket with two of the supplied mounting
screws.
3. Feed the tweeter wires from behind the mounting
panel, through the mounting bracket, and install to the
tweeter by pressing the push on connectors onto the
tweeter connecting lugs. Observe polarity with the red
wire connected to the positive (+) lug and the black
wire connected to the negative (-) lug.
4. Align the tweeter with the bracket and snap in place.
1. Cut a hole, using the supplied template. Insert the flush
mounting spring clips into the slots in the cup and
thread the supplied screw into the inside center of the
mounting cup. Insert the cup into the hole and tighten
the screw until the spring clips are secured.
2. Snap the tweeter into the surface mounting bracket.
3. Feed the tweeter wires from behind the mounting
panel, through the cup, and install to the tweeter by
pressing the push on connectors onto the tweeter con-
necting lugs. Observe polarity with the red wire con-
nected to the positive (+) lug and the black wire con-
nected to the negative (-) lug.
4.Insert the assembly into the cup and rotate clockwise
until it locks in position.
