McIntosh MCD7008, Руководство пользователя

Страница: 13 / 24

7: To remove a disc, press the disc number (1 through 6 or SINGLE) button. A RED indicator
starts flashing above the disc number on the display. Press the LOAD button. The tray will
slide out allowing you to remove the disc.
8: To remove ALL discs. Start with disc number 1 and press LOAD. The drawer will open allow-
ing you to remove the disc. Press LOAD again and the second disc will be placed in position
to be removed. Press LOAD again and the disc drawer will open allowing the second disc
to be removed. Repeat this procedure to remove further discs.
If the STORE button is pressed without a disc on the tray, the loading operation will be
canceled. The disc in slot 1 will be placed in position and the player enters the STOP mode.
3 INCH COMPACT DISCS
Place 3 inch discs ONLY in the SINGLE tray. Do not attempt to place them in any of the
slots 1 through 6. Do not place an adapter on a 3 inch disc for use with this player. This can
lead to damage or may cause the adapter and disc to jam inside the player.
Press the SCAN button. The player will automatically select disc 1, play track 1 for 10
seconds, then do the same on all of the discs stored in the player. This allows identification
of the music on each of the discs. All 6 discs as well as the 7th single disc will be sampled.
Time data including Total Number of Tracks, Total Playing Time, Playing Time for each track
of all discs loaded into the player can be placed into the player's memory by pressing the
TIME DATA button.
1: Cancel the memory of RANDOM PLAY mode if it had been selected previously.
2: Press the STOP button. (Unnecessary if player is already in STOP mode.)
3: Press the TIME DATA button. The time data of each disc (including the disc in the SINGLE
section), is automatically retrieved and stored in the player's memory, starting with the disc
in slot 1. When all the discs have been checked and data stored, the number of tracks and
total playing time of each disc are then displayed for 2 seconds in turn.
4: The player will then return to the condition active before the TIME DATA button was pushed.
COMPLETE TIME DATA ON ALL THE DISCS WILL NOW BE IN THE PLAYER MEMORY,
READY FOR SELECTION OF SPECIFIC DISCS AND TRACKS.
To CANCEL the memorizing operation, press any operation button such as STOP or PLAY,
or one of the numeric keypad buttons.
(The disc information first must have been stored in the TIME DATA memory before this opera-
tion can occur.)
1: Press the STOP button.
2: Select the desired disc by pressing a DISC button.
12
HOW TO LOAD,
STORE, AND
PLAYBACK UP
TO 7 DISCS
HOW TO
CHECK LOADED
DISC INVENTORY
BY USING SCAN
HOW TO
STORE DISC
INFORMATION
IN TIME DATA
MEMORY
HOW TO
MEMORIZE AND
SELECT DESIRED
TRACKS FOR
PLAYBACK