McIntosh MC7100, Руководство пользователя

Страница: 9 / 20

3. SAW THE PANEL CUTOUT
First make the two long horizontal cuts. Then make the two short vertical cuts. After the
cutout is finished, use a file to square the corners and smooth any rough edges.
4. INSTALL THE PANLOC MOUNTING STRIPS
The hardware package includes two
mounting strips and two black flat head
6/32 x 1 1/4 inch (31.8mm) screws and two
6/32 x 1 1/4 inch (31.8mm) fillister head
screws. Place a mounting strip behind
each edge of the cutout and secure it to
the back side of the panel inserting a black
flat head 6/32 screw through the center
holes marked B on the template. Make
sure the screws are drawn flush or slightly into the wood before attaching the PANLOC shelves.
5. ATTACH THE PANLOC SHELVES
Position the PANLOC shelves inside the
cutout with the short flange against the
front face of the cabinet panel. Fasten the
shelves by inserting two fillister head 6/32
screws through the holes in each of the
PANLOC shelf flanges, through the front
panel and into the threaded receptacle on
the mounting strips.
6. INSTALL THE AMPLIFIER
Guide the amplifier AC power cord through the panel opening to the back of the cabinet.
Slide the amplifier into the opening, making sure the rails on the bottom of each side of the
amplifier chassis engage the tracks on the PANLOC shelves. Slide the amplifier completely
into the cabinet until the back side of its front panel is pressing gently against the front of
the cabinet panel. Turn the PANLOC buttons approximately one-quarter turn clockwise to lock
the amplifier in the cabinet. Turn the PANLOC buttons one-quarter turn counterclockwise to
unlock and remove the amplifier.
7
INSTALLATION