19
Packing Instructions
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as de-
scribed and shown below.
The MC2102 Vacuum Tubes must be removed from the
Amplifier Tube Sockets and placed into the inside open-
ings of the four layer foam packing material. The foam
with the tubes located inside are placed into the Amplifier
Tube Cover and secured to the Chassis. Failure to do this
will result in damage to the Vacuum Tubes and possibly the
MC2102.
Four 1/4 - 20 x 2-1/4 inch cap screws and flat washers
must be used to fasten the unit securely to the Shipping
Skid. This will ensure the proper equipment location in the
Inner Carton. Failure to do this will result in shipping dam-
age.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please call
or write Customer Service Department of McIntosh Labo-
ratory. Please see the Part List for the correct part numbers.
Quantity Part Number
Description
1
034052
Shipping carton top
1
034051
Shipping carton bottom
2
034054
Foam Pad (top and bottom)
2
034186
Foam Pad (front and rear)
2
034187
Foam Pad (sides)
2
034180
Foam pack tube (ends)
2
034179
Foam pack tube (inside with
tube cutouts)
1
034136
Inner carton top
1
034137
Inner carton bottom
1
034008
Bottom pad
1
034161
Shipping skid
4
101212
1/4 - 20x2-1/4 cap screw
4
104058
Flat washer
