background image

Scope and Duration of Warranty

Subject to the terms and conditions stated below, McIntosh Laboratory, Inc. (“McIntosh”) warrants 
to the original owner that this Product shall be free from defects in workmanship or materials for a 
term of three (3) years from the date when it was purchased from an Authorized McIntosh Dealer. 
Provided, however, that rather than the three (3) years of coverage afforded the Product generally, where 
applicable, vacuum tubes contained in our Products are warranted for 90 days from the date of purchase, 
hard disc drives and projector lamps contained in our Products are warranted for one (1) year from the 
date of purchase.

Limitations on Persons and Products Covered by this Warranty

This Warranty and all rights provided here under are limited to the original owner. In the event that the 
original owner transfers ownership of the Product prior to expiration of the three-(3) year term, this 
Warranty shall terminate in its entirety upon the date of such transfer. In addition, McIntosh does not 
warrant in any way Products which are purchased from anyone who is not an Authorized McIntosh 
Dealer, or which have had their Serial Numbers altered or defaced. Therefore this Warranty is void 
and inapplicable if this Product has been purchased from someone other than an Authorized McIntosh 
Dealer, or has had its original Serial Numbers altered or defaced.

Geographical Limitations

This Warranty has been included with a McIntosh Product that is designed, intended to be sold and used 
only within the United States and Canada. Accordingly, this Warranty only applies to Products which 
are purchased in the United States or Canada, and only applies while such Products are used in the 
United States or Canada. Products purchased outside the United States or Canada, and failures occurring 
outside the United States or Canada, are not covered by this Warranty.

What McIntosh will do under the Warranty

In the event of any defect covered by this Warranty, McIntosh shall without charge provide all parts, 

PDWHULDOVDQGODERUQHFHVVDU\WRUHVWRUHWKH3URGXFWWRLWVRULJLQDOVSHFL¿FDWLRQV$IWHUUHSDLU0F,QWRVK

shall return the Product to its owner at the owner’s expense. In the alternative, McIntosh may at its sole 
option either replace the Product without charge, or if replacement is not commercially practicable 
or repair or replacement cannot be accomplished within a reasonable time, McIntosh may refund the 
purchase price of the Product, subject where appropriate to reasonable depreciation for actual use 
in accordance with applicable laws, in full satisfaction of its warranty obligations. McIntosh or its 
Authorized Service Agency will undertake to complete the repair and return of the Product as soon as 
circumstances permit, unless prevented by causes beyond their reasonable control.

Limitations on McIntosh’s Obligations under the Warranty

McIntosh’s sole Obligation under this Warranty shall be to repair or replace the Product, or at its option 
refund the purchase price, as provided for hereinabove. McIntosh does not warrant against, nor shall 
it be liable for, any of the following: removal or installation charges; shipping expenses either to or 
from McIntosh or its Authorized Service Agency; loss of use; property damage of any kind; or other 
incidental or consequential damages or losses of any kind.

Note: Some states do not allow exclusion or limitation of consequential damages, so the foregoing 

exclusions may not apply to you.

Parts and Occurrences that are not Covered by the Warranty

This Warranty does not cover any of the following: (a) glass panels, cabinetry, trim, or other appearance 
items (except where they are defective at the time of original sale and the Product is delivered for 

UHSDLU ZLWKLQ WKH ¿UVW WKLUW\  GD\V WKHUHDIWHU E EDWWHULHV RU GDPDJH WR WKH 3URGXFW FDXVHG E\

failure of batteries; (c) or damage to the Product caused by failure of projector lamp; (d) loss of, or 

GDPDJH RU FRUUXSWLRQ WR GLJLWDO GDWD ¿OHV RU RWKHU LQIRUPDWLRQ FRQWHQW RI DQ\ NLQG UHJDUGOHVV RI

cause; (e) failures arising from accident, catastrophe, misuse, neglect, or failure to properly connect 
and operate the Product in accordance with the accompanying instructions; (f) failures arising from 
improper installation or removal of the Product; or (g) failures arising from any tampering, alteration, 
or damage to the Product or attempted servicing of the Product by anyone other than McIntosh or an 
Authorized McIntosh Service Agency; and McIntosh shall have no liability or obligation of any kind 
with respect to any of the foregoing types of failures.

What the Owner must do to obtain service under this Warranty

To obtain service under this Warranty, the owner must at the owner’s expense arrange for any necessary 
de-installation of the Product, and deliver or ship the Product to McIntosh at the address below, or 
to an Authorized McIntosh Service Agency, properly packaged, prepaid, and insured at the owner’s 
expense. In addition, the owner must provide evidence that the Product is at the time of delivery within 
the scope of his Warranty, by either having completed and submitted to McIntosh on a timely basis the 
accompanying Warranty Registration Card, or by including the original sales receipt (photocopies are 
not acceptable) with the Product when it is delivered for repair.

What the Owner must Pay For

As noted above, the owner must pay any expense of removing the Product from its installation, and 
must pay any expenses for delivery of the Product to McIntosh or the Authorized McIntosh Service 
Agency. Upon return of the Product to the owner following repair, it shall be the owner’s responsibility 
to pay for the shipping charges incurred in return of the Product, as well as to arrange and pay for any 
re-installation which may be required. In addition, it shall be the owner’s obligation to pay for any 
repairs made to any Product for which the owner has neither completed and submitted the Warranty 
Registration Card at the time of purchase nor included the original sales receipt with the Product when 
delivered for service, at McIntosh’s or its Authorized Service Agency’s then-current repair rates.

How to learn where the nearest Authorized McIntosh Service Agency is, or 
obtain answers to other questions concerning this Warranty

In order to learn the name and address of the nearest Authorized McIntosh Service Agency, obtain 
instructions for shipment of a covered Product to McIntosh, or obtain the answers to any other 
questions you may have concerning this Warranty, you may telephone McIntosh’s Customer Service 
Department between the hours of 9:00 a.m. and 4:30 p.m. Eastern Time, Monday through Friday, at 
888-979-3737 (607-723-3512) or write to McIntosh at 2 Chambers Street, Binghamton, New York 
13903-2699, Attention: Customer Service Department or visit the “Contact Us” area of the McIntosh  
Web Site at 

www.mcintoshlabs.com

.

1RWH7KLV:DUUDQW\JLYHV\RXVSHFL¿FOHJDOULJKWVDQG\RXPD\DOVRKDYHRWKHUULJKWVZKLFKYDU\

from state to state.

Copyright 2016 © by McIntosh Laboratory, Inc.

Содержание MA5200



















































Отзывы: