35
MA12000 Packing Material List
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as
shown below. It is very important that the four plastic
feet are attached to the bottom of the equipment. Two
1/4-20 x 2-1/4 inch screws and washers must be used
to fasten the unit securely to the bottom pad and wood
skid. This will ensure the proper equipment location
on the bottom pad. Failure to do this will result in
shipping damage.
Use the original shipping carton and interior parts
only if they are all in good serviceable condition.
If a shipping carton or any of the interior part(s)
are needed, please call or write Customer Service
Department of McIntosh Laboratory. Refer to page 2.
Quantity
Part Number
Description
1
034052
Shipping carton top
1
034051
Shipping carton bottom
2
034186
Front and rear foam pad
2
034187
Side foam pad
2
034054
Top and bottom foam pad
1
034136
Inner carton top
1
034137
Inner carton bottom
1
034188
Inner foam pad
1
034479
Shipping skid
4
401212
1/4-20 hex cap x 2-1/4 inch screw
2
104058
1/4 inch flat washer 1-1/2 inch
4
017937
Plastic foot
4
404080
#10 flat washer
