McIntosh MA 230 - SERVICS BULLETINS, Руководство пользователя

Страница: 18 / 24

(See page 15 ADJUSTING FOR SPECIAL
EFFECTS.)
5. Set the LF filter switch to FLAT. (See
page 15 ADJUSTING FOR SPECIAL EF-
FECTS.)
6. Set the LOUDNESS switch to NORMAL.
(See page 15 ADJUSTING FOR SPECIAL
EFFECTS.)
7. Set the TAPE switch to NORMAL.
8. Set the BASS CONTROLS and TREBLE
CONTROLS so that the indicators are cen-
tered between the panel markings L and R.
(See page 15 BASS and TREBLE CON-
TROLS.)
9. Adjust the VOLUME control to the de-
sired volume.
10. Adjust the BALANCE control if neces-
sary.
LISTENING TO MONOPHONIC RECORDS
To listen to monophonic records, proceed
as follows:
1. Turn the INPUT SELECTOR to PHONO
1 or PHONO 2, whichever is connected to the
cartridge you wish to hear.
2. Turn the MODE SELECTOR to MONO
(L+R).
3. Set the PHASE switch to 0°.
4. Set the HF cutoff filter switch to FLAT.
(See page 15 ADJUSTING FOR SPECIAL
EFFECTS.)
5. Set the LF filter switch to FLAT. (See
page 15 ADJUSTING FOR SPECIAL EF-
FECTS.)
6. Set the LOUDNESS switch to NORMAL.
(See page 15 ADJUSTING FOR SPECIAL
EFFECTS.)
7. Set the BASS CONTROLS and TREBLE
CONTROLS so that the indicators are cen-
tered between the panel markings L and R.
(See page 15 BASS AND TREBLE CON-
TROLS.)
8. Adjust the VOLUME control to the de-
sired volume.
9. Adjust the BALANCE control if neces-
sary.
LISTENING TO TAPE DECKS
To listen to tape from a tape deck, proceed
as follows:
1. Turn the INPUT SELECTOR to TAPE
HEAD.
2. Turn the MODE SELECTOR to MONO
(L+R) or STEREO, depending on the pro-
gram on the tape.
3. Set the PHASE switch to 0°.
4. Set the HF cutoff filter switch to FLAT.
(See page 15 ADJUSTING FOR SPECIAL
EFFECTS.)
5. Set the LF filter switch to FLAT. (See
page 15 ADJUSTING FOR SPECIAL EF-
FECTS.)
6. Set the LOUDNESS switch to NORMAL.
(See page 15 ADJUSTING FOR SPECIAL
EFFECTS.)
7. Set the BASS CONTROLS and TREBLE
CONTROLS so that the dial indicators are
centered between the panel markings L and R.
8. Adjust the VOLUME control to the
desired volume.
9. Adjust the BALANCE control if neces-
sary.
LISTENING TO A STEREO TAPE MACHINE
A stereo tape machine with its own play-
back preamplifiers should be plugged into
the AUX input or the TAPE MONITOR i n p u t -
not the TAPE HEAD input.
If the TAPE input is used, proceed as
follows:
1. Turn the INPUT SELECTOR to TAPE.
2. Turn the MODE SELECTOR to MONO,
(L+R) or STEREO depending on the program
on the tape.
3. Set the PHASE switch to 0°.
4. Set the HF cutoff filter switch to FLAT.
(See page 15 ADJUSTING FOR SPECIAL
EFFECTS.)
5. Set the LF filter switch to FLAT. (See
page 15 ADJUSTING FOR SPECIAL EF-
FECTS.)
6. Set the LOUDNESS switch to NORMAL.
(See page 15 ADJUSTING FOR SPECIAL
EFFECTS.)
7. Set the BASS CONTROLS and TREBLE
CONTROLS so that the dial indicators are
centered between the panel markings Land R.
8. Adjust the VOLUME control to the de-
sired volume.
9. Adjust the BALANCE control if neces-
sary.
If the AUX input is used, turn the INPUT
SELECTOR to AUX; then, proceed the same
16