background image

5

Introduction

Performance Features

Introduction and Performance Features 

The McIntosh C50 Audio Preamplifier is one of the 

finest Preamplifiers ever created with connections for 

both analog and digital sources. The C50 Outputs have 

the ability to drive multiple Power Amplifiers. The 

C50 reproduction is sonically transparent and abso-

lutely accurate. The McIntosh Sound is “The Sound of 

the Music Itself.”

• Electromagentic Input Switching with Level Trim 

Adjustment

Digital Logic integrated circuits drive Electromag-

netic Switches on all Inputs and operating functions 

for reliable, noiseless, distortion free switching. All 

eight Inputs on the C50 can be matched in level, so 

there are no abrupt changes in volume levels between 

the different Inputs.

• Moving Coil and Moving Magnet Phono Inputs

The C50 contains two different precision Phono Pre-

amplifier Circuits. One for low output Moving Coil 

Phono Cartridges with selectable resistance loading, 

the other is for Moving Magnet Cartridges with select-

able capacitive loading. Both circuits use the latest 

designs to provide the lowest possible noise and dis-

tortion. The RIAA Correction Equalization Circuitry 

utilizes close tolerance resistors and capacitors for an 

extremely flat frequency response.

• Digital Audio Inputs

The C50 has Coaxial, Optical and USB Digital Inputs 

to Decode PCM Signals from an external source. The 

C50 Up Samples the Digital Signal to 192kHz with 

32Bit resolution before the Digital to Analog process 

begins. The USB Input sends basic commands (e.g. 

Play/Pause, Next, Back, etc.) to the computer by using 

the C50 Remote Control.

• Balanced Inputs

 

The Balanced Inputs allow the connection of a source 

component using long cable lengths without a loss in 

sound quality.

• Precision Tracking Volume Control

Volume levels are controlled by a new Multi-Stage 

Precision Digitally Controlled Attenuator System with 

a tracking accuracy of 0.1dB.

• Variable Rate Volume and Balance Controls

The C50 Preamplifier’s Volume and Balance Control 

Circuitry provides an ideal rate of change with control 

rotation.

• Equalizer Controls with Bypass

The Equalizer Circuitry provides 12dB of boost or cut 

at eight different center frequencies. When an Equal-

izer Control is in the center position, all Circuit Com-

ponents are removed from the Signal Path. The C50 

remembers the Equalizer Circuitry Bypass Option for 

each input.

• Alphanumeric Fluorescent Display

The Front Panel Information Display indicates the 

Source Selection, Volume/Balance Levels and Setup 

Mode Selections. The display intensity is adjustable.

• Processor Loop

A Processor Loop is provided for connection of an 

external analog signal processor. The Processor Loop 

can be switched in or out of the signal path of any as-

signed Input.

• Pass-Thru Mode

 The Automatic Pass-Thru Mode allows the C50 to be-

come part of a Multichannel Sound System for DVD-

Audio, SACD and Home Theater Movies.

• Remote Control with External Sensor Input

The Remote Control provides control of the C50 

operating functions and McIntosh Source Components 

connected to it. Enjoy your McIntosh System from 

another room in your home by connecting an external 

sensor.

• Power Control Output and Trigger Assignment

A Power Control connection for convenient Turn-On 

of Power Amplifiers, Source Components and Acces-

sories is included. The Power Control Trigger Ouputs 

may be assigned to activate when a given Input is 

selected.

• Special Power Supply

Fully regulated Power Supplies and a special R-Core 

Power Transformer ensure stable noise free operation 

even though the power line varies.

• Fiber Optic Solid State Front Panel Illumination

The even Illumination of the Front Panel is accom-

plished by the combination of custom designed Fiber 

Optic Light Diffusers and extra long life Light Emit-

ting Diodes (LEDs).

• Glass Front Panel and Super Mirror Chassis

Finish

The famous McIntosh Illuminated Glass Front Panel 

and the Stainless Steel Chassis with Super Mirror 

Finish ensures the pristine beauty of the C50 will be 

retained for many years.

Содержание C50





























Отзывы: