21
• Plug the charger into an appropriate AC power outlet.
• Insert the battery pack along the support rails of the charger.
The indicator lights on the charger show the charging status:
The intelligent charger measures the charge level of the battery pack and charges the
battery accordingly with the required current and voltage, based on battery temperature
and voltage, this ensures maximum battery life. Charge the battery fully before storage.
A flashing red LED light on the charger indicates that the battery temperature is not within
the charging temperature range of 4°C - 40°C or the charging current is too high. As soon
as the permitted temperature and the charging current ranges are reached, the battery
charger will automatically switch to charging.
After continuous or repeated charging cycles without interruption, the charger may warm
up. This is normal and does not indicate a technical defect of the battery charger.
Rapidly flashing green LED’s indicates that the battery voltage is low, the battery will
receive an extended charge cycle, approximately 30 minutes longer. This does not indicate
a defect with the battery.
Symbol
Indicator lights
Status
red, flashing
charging paused, see
instructions below.
red,
continuous
connected to power supply
green,
flashing
charging
green,
continuous
fully charged
Preparation
Step 2 - Battery Charging
