McGREGOR 377700, Инструкция по эксплуатации

Страница: 3 / 12

3
expose the user to considerable risk.
• Never operate this appliance if it is not working properly, or if it has been dropped into water.
• Do not use attachments not recommended by the manufacturer.
• Do not use extension cord to operate appliance. Plug the adapter directly in the electrical outlet.
• Do not bend the electrical cord.
• Keep cord away from the heated surfaces.
• Check that the voltage indicated on the adapter corresponds to the local mains voltage before you connect the
appliance.
• For additional protection, we advise you to install a residual current device (RCD) with a rated residual operating
current non exceeding 30mA in the electrical circuit supplying the bathroom. Ask your installer for advice.
• Do not use the shaver for purposes other than styling human hair. This shaver is designed to shorten and trim hair
and beards. Do not use the shaver to cut artificial hair.
• Normal charging will be take 8 hours. The maximum shaving time is 50 minutes with a full charge.
• The USB cable must not come into contact with water or other liquids as this may cause electric shock. Therefore,
never use the shaver over a filled sink or while having a bath.
• lf the shaver falls into water, immediately pull the mains adaptor out of the wall socket.
• Do not wash the shaver with water.
• WARNING: Keep the shaver and the power cable dry.
• Cleaning and user maintenance must not be carried out by children without supervision.
• For your children’s safety, please keep all packaging (plastic bags, boxes, polystyrene etc.) out of their reach.
• Unplug the shaver if you do not plan to use it for a long time, or if the shaver malfunctions during use, also during
thunderstorms and when cleaning.
• Take care not to damage the power cable. Do not bend, extend, twist or otherwise manhandle it. Do not place
heavy objects on the power cable or squeeze it as this may create a risk of electric shock or fire. If the power
cable is damaged, it must be replaced by a designated maintenance agent in order to avoid a dangerous situation.
• Do not plug in or pull out the power adaptor with wet hands or you may receive an electric shock.
• Do not wash the shaver body or power adaptor with water or expose them to water as this may create a risk of
electric shock or short circuit.
• The power adaptor must be pulled out of the mains socket before maintenance is carried out, otherwise there is a
risk of electric shock.
• Please keep these instructions for future reference. Contact manufacturer for instructions in an alternative format.
• Incorrect handling of the batteries can lead to an explosion or to acid burns.
• Never attempt to recharge non-rechargeable batteries.
• Avoid contact of the fluid in the battery with skin, eyes and mucous membranes.
CHARGING THE RECHARGEABLE BATTERY
• Charging the rechargeable battery before first use, the hair shaver must be fully charged.
• Make sure the shaver is turned off.
• Insert the connector of the USB charging cable into the shaver.
• Plug the USB charging cable into a mains adaptor and plug it into a mains socket. The indicator light will come on
to indicate charging. It will not go out when the battery is fully charged. This appliance contains batteries that are
non-replaceable.
CLEANING AND MAINTENANCE
• Turn off your shaver and wait until it is completely cool. Before cleaning, remove the accessory and the used blade
and clean with the aid of the cleaning brush that was fitted in the product.
• Clean your shaver using a damp cloth and then dry it.